BlokCam: Wireless Crane Camera

Crosby BlokCam is a wireless camera system that can be quickly and easily deployed to the hook block or boom tip of a crane.

This allows the operator to see and hear the load and surroundings, giving an unobstructed, live, audio-visual feed of the critical areas that working in the blind would never allow.

Want more information on Crosby BlokCam?


There are two different camera systems configured specifically for each application.

HOW DOES THE BLOCKCAM INCREASE SAFETY?

  • REDUCING THE HAZARDS – The operator now has eyes and ears at the crane block.
  • REDUCE IMPACTS & COLLISIONS – Allow the operator to respond to any adjustments to avoid any potential accidents before they happen.
  • IMPROVED COMMUNICATION – Ability to communicate to the riggers, and signallers.
  • CONFIRM LOAD SECURITY – Ability to confirm the balance and security before starting the lift.
  • BLOKCAM REDUCING THE BLIND LIFT – Live audio and video footage gives the ability to see and hear what’s going on below the hook and around the load.

HOW DOES THE BLOKCAM INCREASE PRODUCTIVITY?

  • IMPROVE LIFT TIMES – Increase in speed and accuracy in all scenarios.
  • RECORDED RESULTS – A camera system installed on a crane can help increase productivity by up to 39% in the blind and 27% in the open as a direct result.
  • ADJUSTMENTS & CORRECTIONS – Make adjustments required to minimize corrections and overshoots and help improve the productivity.
  • RETURN ON THE BOTTOM LINE – Benefits of improved communication and maximized safety all play their part in the contribution to the greater efficiency and enhancement to the productivity of the lifting tasks on any site.

Button LeftFREQUENTLY ASKED QUESTIONSButton Right



X2 BlokCam System
Components of the X2 System
  • SENSOR – S4 – The S4 is a 113° wide-angle lens. The low profile design, tool-free operation, and rotatable lens allows for easy installation on any side of the hook block including in between the cheek plates.
  • TRANSMITTER – X2 – X2 dramatically improves the most important aspects of the BlokCam. The combination of performance, specification, aesthetics, and 71mm low profile design make this a must for all crane operations.
  • BATTERY – B5 – B5 is a nonhazardous 19.2v Battery Pack. The clever tool-free design and easy-grip finger slots makes it easy to install, remove and charge.
  • REPEATER – R4 (optional) – Depending on the crane type and required installation the Repeater is mounted on the jib, boom tip or cab. The Repeater has been specifically designed for fast, wireless, telescopic deployment.
  • MONITOR – M2 – Our HD Monitor is a 10.1 inch 16:9 LCD monitor with built-in speakers and a HDMI input. It has a 1280 x 800 pixel panel with automatic brightness control.

X2 Base Price Starting At $13,183



M3 BlokCam System
Components of the M3 System

  • SENSOR – S4 – The S4 is a 113° wide angle lens. The low profile design, tool free operation and rotatable lens allows for easy installation on any side of the hook block including in between the cheek plates.
  • TRANSMITTER – X2 – X2 dramatically improves the most important aspects of the BlokCam. The combination of performance, specification, aesthetics and 71mm low profile design make this a must for all crane operations.
  • BATTERY – B5 – B5 is a non hazardous 19.2v Battery Pack. The clever tool-free design and easy grip finger slots makes it easy to install, remove and charge.
  • REPEATER – R4 (optional) – Depending on the crane type and required installation the Repeater is mounted on the jib, boom tip or cab. The Repeater has been specifically designed for fast, wireless, telescopic deployment.
  • MONITOR – M3 – The M3 is an all in one display that combines a monitor, repeater and processor in to a purpose built fast fit system. The M3 has a HD display with built in speakers, automatic brightness control, less than 0.2 seconds of latency and multivoltage AC and DC inputs.

M3 Base Price Starting At $11,886


Button LeftFREQUENTLY ASKED QUESTIONsButton Right


Sensor - S4

Sensor – S4

The S4 is a 113° wide-angle lens. The low profile design, tool-free operation and rotatable lens allows for easy installation on any side of the hook block including in between the cheek plates.

Transmitter - X2

Transmitter – X2

X2 dramatically improves the most important aspects of the BlokCam. The combination of performance, specification, aesthetics and 71mm low profile design make this a must for all crane operations.


Battery - B5

Battery – B5

B5 is a non hazardous 19.2v Battery Pack. The clever tool-free design and easy-grip finger slots makes it easy to install, remove and charge.

Repeater - R4

Repeater – R4

Depending on the crane type and required installation the Repeater is mounted on the jib, boom tip or cab. The Repeater has been specifically designed for fast, wireless, telescopic deployment.


Processor - P2

Processor – P2

BlokCams’ purpose-built Processor can project multiple high definition images and audio’s through a single HDMI lead with less than 0.2 seconds of latency. The design of the Processor accommodates multi-voltage AC and DC inputs making your BlokCam system compatible across all types of cranes. The Processor also provides power to the monitor, eliminating the need for a secondary socket or power supply.

X2 Monitor - M2

X2 Monitor – M2

Our HD Monitor is a 10.1 inch 16:9 LCD monitor with built-in speakers and a HDMI input. It has a 1280 x 800 pixel panel with automatic brightness control.


M3 Monitor - M3

M3 Monitor – M3

The M3 is an all in one display that combines a monitor, repeater and processor in to a purpose built fast fit system. The M3 has a HD display with built in speakers, automatic brightness control, less than 0.2 seconds of latency and multivoltage AC and DC inputs.

Charging Station - CS1

Charging Station – CS1

Our Charging Station is designed to improve the efficiency of your BlokCam Batteries and the performance of the camera system.


Button LeftFREQUENTLY ASKED QUESTIONSButton Right


Want more information on Crosby BlokCam?